CDN2000A-06-32 - three phase CDN with automatic coupling path selection
(Published in September 2002)
The CDN2000A-06-32 is a coupling de-coupling network for surge, ring and EFT testing. The CDN can be used with all TRA2000 and the MIG0603INx generators. Two different versions are available: one for a power supply of 240/415 V and one for 280/480 V.
| Rating: | Supply Voltage (a.c. or d.c.): L to N/PE 240 V, L to L 480 V Supply Current: Continuous operation (a.c. or d.c.): Continuous operation (d.c.): Test Voltages: Surge voltage: maximum 6.6 kV Ring voltage: maximum 6.6 kV EFT voltage: maximum 6.3 kV |
 enlarge  enlarge  enlarge |
| Control: |
RS232 connection from the rear side of the TRA2000 or MIG0603INx to the CDN2000A-06-32 For the selection of the coupling paths see the displays on the right. Power supply: 90 to 240 V and 50/60Hz |
|
| Standards: | IEC 61000-4-5, ANSI/IEEE C62.41 and C62.45, IEC 61000-4-4 |
|
| Option: | 480V: for power supply L to N/PE 280 V and L to L 480 V |
|
| For use with these generators: | TRA2000, TRA2000IN4, TRA2000IN6, MIG0603IN, MIG0603IN1, MIG0603IN3, MIG0603IN4 |
For more information please have a look at
- our brochures (pdf) about our One Box EMC Test Stations and the surge testers,
- the calibration protocol,
- or contact the representative in your region.
