May 2007

Electronic Power Supply PS3

To compliment the already successful Harmonics & Flicker and Transient test systems, EMC Partner introduce a new line in laboratory power supplies.

Specially designed for use in EMC and general testing laboratories. The PS3 range has predefined voltage frequency combinations for industrial, telecom, avionic and rail applications. Apart from the predefined outputs, software is available to program voltage up to 280V and frequencies to 400Hz. Test routines for frequency variation testing to IEC61000-4-28 are also included.
enlarge
 
Learn more here:

Automatic Combination Wave System

Available in two versions, with integrated 1 phase or 3 phase CDNs, the 12kV Combination Wave impulse superimposed on AC or DC power supplies, can be used in industrial and telecom applications.

Typical standards requiring this type of impulse are; IEC61000-4-5, ANSI C62.41, IEC61643-1 and ITU-K44 (enhanced level tests). MIG1206-1P-32 is for single phase and MIG1206-3P-32 is for three phase applications.
enlarge
 
Learn more here:

30MHz Damped Oscillatory Test System

MIG-OS-OM-EXT enables existing EMC Partner customers to upgrade their Damped Oscillatory wave generators to include the new frequencies 3MHz, 10MHz and 30MHz as specified in IEC61000-4-18. The new requirement includes tests on Gas Insulated components for the electricity distribution network.

Used together with the new CDN3000-06-25, the Damped oscillatory impulses can be superimposed on power supply or data lines. The same CDN can also be used with Transient and MIG generators for Electric Fast transient (EFT), Combination Wave (CWG) and 100kHz Ring wave tests.
enlarge
 
Learn more here:

Integrated CWG & 10/700µs Telecom Test System

Available as 1 phase or 3 phase versions, for enhanced level testing of telecom and power interfaces. The unit incorporates a 12kV/6kA Combination Wave together with a 6kV 10/700µs impulse with automatic CDN for AC or DC power supply applications.

Typical standards requiring this type of impulse are; IEC61000-4-5, ITU-K20 and ITU-K21 (enhanced level tests). MIG1206-1P-T is for single phase and MIG1206-3P-T is for three phase applications.
enlarge
 
Learn more here:

New Capacitor Test System Brochure

The updated and enhanced brochure includes the latest information for X/Y capacitor test equipment. Included are impulse tests using the MIG0603CAP, MIG1212CAP and the active flammability tests using the MIG1803CAP.
 
Learn more here: