Component Tests: Insulation Material

Below you find short descriptions of EMC PARTNER's products for tests on insulation material:

MIG1203

Waveforms:
(Range)		 Waveform1: 1.2/50 µs
Waveform 2: <0.8 µs/ > 1000 µs
(1000V up to 12000V)


enlarge
Standards: IEC 60060-1, IEC 61010-1
Required Accessories: TC-MIG24 or CN-MIG24
Accessories: TEMA: Test Manager Software

Networks:
NW-IEC61036C1: 0.5J, 500 Ohm, voltages 0.8, 1, 2.5, 4 kV
NW-IEC61036C2: 0.5J, 500 Ohm, voltages 8, 10, 12 kV
NW-IEC60065-1, 1 nF, 1 to 10 kV

 

For more information please have a look at

MIG3603

Waveforms (Range): 1.2/50 µs (1500 V up to 36000V)

1.2/50 µs, 8/20 µs (2 Ohm, 250 V up to 6000 V)
enlarge
Standard: IEC 60060-1
Options: 1.2/50 µs 500 Ohm
Required Accessory:









 TC-MIG24, TEMA, CN-MIG24

 

For more information please have a look at

MIG-COMAT36

Waveforms (Range): 1.2/50 µs (up to 6 kV, 1000 A)
10/700 µs (up to 6 kV, 150 A)
a.c. (2500 V, < 200 mA)
d.c. (3000 V, < 200 mA)
Control: RS232, TEMA Software (free programming of all 36 outputs)
Option: a.c., d.c. application
Required:
 TRA2000, TRA2000IN6, MIG1203, MIG0603IN, MIG0603IN1, MIG0603IN2 or MIG0603IN3

 

For more information please have a look at: