Immunity: Oscillation

Below you find short descriptions of EMC PARTNER's products for

damped oscillation and
ring wave tests

as well as for

damped oscillatory and magnetic field tests in one box.

The ring wave test is also included in the One Box EMC Test Station.

MIG-OS-OS1

Waveform (Range):	1 MHz (up to 3 kV), 100 kHz (up to 3 kV), ta = 75 ns	enlarge
Impedance:	200 Ohm
Standards:	IEC 60255-5, IEC 61000-4-18
Option:	MF IEC 61000-4-10
Required Accessory:	CDN2000-06-25

For more information please have a look at

our brochure (pdf) about protection relay testers
or contact the representative in your region.

MIG-OS-OM-EXT

This addition to the damped oscillatory test system adds the 3MHz, 10MHz and 30MHz fast waves to existing generators of type MIG-OS-OS1, MIG0603OS1, MIG-OS-OM and MIG0603OMI

Waveforms (Range):	Damped sine wave: 3MHz, 10MHz and 30MHz open circuit (up to 4 kV)	enlarge
Standards:	IEC61000-4-18	enlarge
Accessories:	CDN3000A-06-25 Power line coupling and de-coupling filter: CWG, 100kHz Ringwave, EFT and Damped oscillatory wave (100kHz, 1MHz, 3MHz, 10MHz, 30MHz) coupling onto 3-Phase power lines up to 6 kV	enlarge

For more information please contact the representative in your region.

MIG0603OMI

Waveforms (Range):	1 MHz, 100 kHz (up to 3kV, 200 Ohm) 1 MHz, 100 kHz (up to 100 A/m) CWG 1.2/50 µs, 8/20 µs (6 kV, 3 kA) 0.5 J, 500 Ohm (0.5, 1, 3, 5 kV) 8/20 µs (up to 2000 A/m) a.c. 50/60 Hz (continuous up to 100 A/m, short time 3 s up to 1000 A/m)	enlarge
Coupling:	fields: MF1000-1, MF1000-2, MF1000-3 a.c.: CDN2000-06-25 up to 4 I/o lines: CND2000-06-25
Standards:	IEC 61000-4-5, IEC 61000-4-8, IEC 61000-4-9, IEC 61000-4-10, IEC 61000-4-18 (1 MHz), IEC 60255-4, ANSI/IEEE C37.90.1)
Required Accessories:	CDN2000-06-25, MF1000-1, MF1000-2, MF1000-3, MF1STAND

For more information please have a look at

our brochures (pdf) about the damped oscillatory wave and magnetic field wave testers
or contact the representative in your region.

MIG-OS-OM

The MIG-OS-OM includes damped oscillatory tests 1 MHz and 100 kHz up to 3 kV in accordance with EN/IEC 61000-4-18. This standard defines a dual output for differential mode tests. Additionally magnetic field test in accordance with EN/IEC 61000-4-10 can be carried out.

Waveforms (Range):	Damped sine wave: 100 kHz and 1 MHz open circuit (up to 3kV) source impedance 200 Ohm	enlarge
Standards:	IEC61000-4-10, IEC61000-4-18, ANSI C37-90	enlarge
Accessories:	CDN2000A-06-25 power line coupling and de-coupling filter: CWG, 100kHz Ringwave, EFT and damped oscillatory wave (100kHz, 1MHz) coupling onto 3-phase power lines up to 6 kV	enlarge
	MF1000-1 magnetic field antenna: Accessory to the MIG-OS-OM. Enables magnetic field testing up to 120A/m at both 100 kHz and 1 MHz.	enlarge

For more information please contact the representative in your region.

MIG0603OSI

The MIG0603OSI includes damped oscillatory tests 1 MHz and 100 kHz up to 3 kV in accordance with EN/IEC 61000-4-18. Additional waveforms extend the application to include EN/IEC61000-4-5 and EN/IEC60255-22-1.

Waveforms (Range):	Damped sine wave: 100 kHz and 1 MHz open circuit (up to 3kV) source impedance 200 Ohm CWG 1.2/50 µs, 8/20 µs (6 kV, 3 kA) source impedance 2 Ohm 1.2/50 µs (up to 6 kV) source impedance 500 Ohm	enlarge
Standards:	EN/IEC61000-4-18, ANSI C37-90, EN/IEC61000-4-5, EN/IEC61000-4-9, EN/IEC60255-22, EN/IEC60255-5	enlarge
Accessories:	CDN2000A-06-25 power line coupling and de-coupling filter: CWG, 100kHz Ringwave, EFT and damped oscillatory wave (100kHz, 1MHz) coupling onto 3-phase power lines up to 6 kV	enlarge

For more information please contact the representative in your region.

MIG0603IN4

Waveform (Range):	Ring 100 kHz (up to 6 kV)	enlarge
Coupling:	a.c.: single phase 16 A d.c.: 16 A / 110 V
Standards:	IEC 61000-4-12, ANSI/IEEE C.62.41

For more information please contact the representative in your region.