Immunity: Surge

Below you find short descriptions of EMC PARTNER's products for surge tests

up to 4 kV (This test circuit is also included in the One Box EMC Test Station.)
up to 6 kV (This test circuit is also included in the One Box EMC Test Station.)
coupling on three phases
up to 6 kV surge onto 100 A a.c.
up to 12 kV.

TRA2000 Version SURGE - Surge up to 4 kV

Waveforms (Range):	v = 1.2/50 µs (0.25 kV up to 4.1 kV), i = 8/20 µs (0.125 kA up to 2.1 kA)	enlarge
Coupling:	single phase 16 A
Standard:	IEC 61000-4-5
Required Accessory:	CDN-KIT1000

For more information please have a look at

our One Box EMC Test Stations brochure (pdf),
or contact the representative in your region.

MIG0603IN - Surge up to 6 kV

Waveforms (Range):	1.2/50 µs (0.25 to 6.2 kV), 8/20 µs (0.125 kA up to 3.1 kA )	enlarge
Coupling:	single phase 16 A
Standards:	IEC 61000-4-5, ITU K.17
Options:	Ring wave 0.5 µs/100 kHz, 10/700 µs
Required Accessory:	CDNKIT1000

For more information please have a look at

our brochure (pdf) about the surge testers
or contact the representative in your region.

CDN2000-06-32 and CDN2000A-06-32

Rating:	Supply Voltage (a.c. or d.c.): L to N/PE 240 V, L to L 480 V Supply Current: Continuous operation (a.c. or d.c.): 3 x 32 A Continuous operation (d.c.): 1 x 64 A Test Voltages: Surge voltage: maximum 6.6 kV Ring voltage: maximum 6.6 kV EFT voltage: maximum 6.3 kV	enlarge enlarge enlarge
Control:	RS232 connection from the rear side of the TRA2000 or MIG0603INx to the CDN2000A-06-32 For the selection of the coupling paths see the displays on the right. Power supply: 90 to 240 V and 50/60Hz
Standards:	IEC 61000-4-5, ANSI/IEEE C62.41 and C62.45, IEC 61000-4-4
Option:	480V: for power supply L to N/PE 280 V and L to L 480 V
For use with these generators:	TRA2000, TRA2000IN4, TRA2000IN6, MIG0603IN, MIG0603IN1, MIG0603IN3, MIG0603IN4

For more information please have a look at

our brochures (pdf) about our One Box EMC Test Stations and the surge testers,
the calibration protocol,
or contact the representative in your region.

MIG0603-3P100 - Surge up to 6 kV onto 100 A a.c.

Waveforms (Range):	1.2/50 µs (0.25 up to 6.2 kV) 8/20 µs (0.125 kA up to 3.1 kA)	enlarge
Coupling:	three phase 100 A
Standards:	IEC 61000-4-5
Required Accessory:	CDNKIT1000
Option:	EFT

For more information please have a look at

our brochure (pdf) about the surge testers
or contact the representative in your region.

MIG1206 - Surge up to 12 kV

Waveforms: (Range)	CWG 1.2/50, 8/20 µs (12 kV, 6 kA)	enlarge
Standards:	IEC 61000-4-5, ITU-T K.44, K.20, K.21
Coupling using CDN-MIG12-32:	Power supply a.c. L-L/N 480V, 32 A Power supply a.c. L/N to PE 280 V Power supply d.c. 280 V, 32 A
Accessories:	see accessories for telecom coupling
Further Accessories:	TEMA (Test Manager Software)

For more information please have a look at

our brochure (pdf) about the surge testers
or contact the representative in your region.

MIG1206-xP-32

The MIG1206-xP-32 is a hybrid generator with two voltage wave shapes; 1,2/50µs at "no load" and a current wave form 8/20µs at short circuit. An integrated automatic coupling/de-coupling network completes the system.

Waveforms:	CWG 1.2/50 µs, 8/20 µs (12 kV, 6 kA)	enlarge
Coupling:	1-Phase: L-PE, N-PE, L-N 3-Phase: L1-PE, L2-PE, L3-PE, N-PE L1-L2, L2-L3, L1-L3, L1-N, L2-N, L3-N L1 + L2 or L1 + L3 etc. to any other line Current: 32A_ac 25A_dc
Standards:	IEC61000-4-5 ANSI C62.41 IEC61643-1 IEC60060-1
Accessories:	TC-MIG24 HL test cabinet: High voltage outputs on front of MIG1206-xP-32 Component and circuit test up to 12kV within the test cabinet	enlarge
	CDN-UTP (4 lines) and CDN-UTP8 (8 lines) telecom coupling de-coupling filters: CWG and 10/700µs - surge coupling onto data lines up to 6kV Application for high speed telecom connections	enlarge

For more information please contact the representative in your region.