Lightning Tests: Telecommunication

Below you find a selection of EMC PARTNER's products for lightning tests on telecommunication equipment based on the following standards or recommendations:

ITU/IEC Impulse 6kV
ITU/IEC Impulse 12kV
ITU Impulse Current
ITU Power Induction/Contact
FCC part68
Telecom Coupling

ITU/IEC Impulse 6kV

MIG0603IN2

Waveforms (Range):	10/700 µs (up to 6 kV) CWG 1.2/50, 8/20 µs (6 kV, 3kA)	enlarge
Coupling:	CWG 1.2/50, 8/20 µs only Power supply a.c. L-N 480 V/16 A Power supply a.c. L/N to PE 280 V Power supply d.c. 110 V/16 A
Standards:	ITU-T K.44, K.17, K.20, K.21, IEC/EN 61000-4-5, IEEE C.62.41, C62.45
Accessories:	see accessories for telecom coupling

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

MIG0603EN

Waveform (Range):	CWG 1.2/50 µs, 8/20 µs (6 kV, 3 kA) 10/700 µs (up to 6 kV) 1.2/50 µs (up to 6 kV)	enlarge
Coupling:	a.c.: CWG 280 V/16 A d.c.: CWG 110 V/16 A
Standards:	IEC 61000-4-5, ITU-T K.44 10/700 µs, ITU-T K.21, IEC/EN 60950
Accessory:	see accessories for telecom coupling

For more information please have a look at

our brochures (pdf) about the telecom testers,
or contact the representative in your region.

TRA2000IN6 and CDN-UTP

Ideal combination for EMC transient tests on telecom equipment.

Waveforms: (Range)	CWG 1.2/50, 8/20 µs (6 kV, 3 kA) 10/700 µs (up to 6 kV) 100kHz ring wave (up to 6 kV) EFT: 5/50 ns (up to 4.4 kV) ESD: CD/AD (up to 8 kV/15 kV) DIPS: all levels voltage and time	enlarge
Standards:	IEC 61000-4-11, IEC 61000-4-5, IEC 61000-4-4, IEC 61000-4-2, ITU-T K.44, K.20, K.21
Coupling:	Power supply a.c. L-N 280V, 16 A Power supply a.c. L/N to PE 280V Power supply d.c. 110V, 16 A
Accessories:	see accessories for telecom coupling
Further Accessories:	TEMA (Test Manager Software) CDN2000A-06-32, CN2000TT MC

For more information please have a look at

our brochures (pdf) about the telecom testers or transient test system
or contact the representative in your region.

ITU/IEC Impulse 12kV

MIG1206 + CDN-MIG12-32

The maximum test levels are specified in the ITU-T K.20 and K.21 documents:

for 10/700 µs up to 6 kV and

for combination wave 1.2/50, 8/20 µs up to 10 kV.

Waveforms: (Range)	CWG 1.2/50, 8/20 µs (12 kV, 6 kA)	enlarge
Standards:	IEC 61000-4-5, ITU-T K.44, K.20, K.21
Coupling using CDN-MIG12-32:	Power supply a.c. L-L/N 480V, 32 A Power supply a.c. L/N to PE 280 V Power supply d.c. 280 V, 32 A
Accessories:	see accessories for telecom coupling
Further Accessories:	TEMA (Test Manager Software)

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

MIG1206-xP-T

The MIG1206-xP-T is a hybrid generator with two voltage wave shapes; 1,2/50µs at "no load" and a current wave form 8/20µs at short circuit combined with the 10/700µs "Telecom" impulse. An integrated automatic coupling/de-coupling network completes the system.

Waveforms (Range):	CWG 1.2/50 µs, 8/20 µs (12 kV/6 kA) Telecom Pulse: 10/700µs open circuit (up to 6 kV)	enlarge
Coupling:	1-Phase L-PE, N-PE, L-N 3-Phase L1-PE, L2-PE, L3-PE, N-PE L1-L2, L2-L3, L1-L3, L1-N, L2-N, L3-N L1 + L2 or L1 + L3 etc. to any other line Current: 32A_ac 25A_dc
Standards:	IEC61000-4-5, ANSI C62.41, IEC61643-1, IEC60060-1, ITU-T K44, ITU-T K20, ITU-T K21
Accessories:	TC-MIG24 HL test cabinet: High voltage outputs on front of MIG1206-xP-32 Component and circuit test up to 12kV within the test cabinet	enlarge
Accessories:	see also accessories for telecom coupling

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

MIG1203T

Waveform (Range):	10/700 µs (up to 12 kV)	enlarge
Standards:	ITU-T K.44, ITU-T K.17, ITU-T K.20, ITU-T K.21, ITU-T K.22, IEC 61000-4-3
Options:	1.2/50 µs up to 12 kV CWG up to 6 kV 10/1000µs up to 12 kV
Required Accessory:	TC-MIG24 or CN-MIG24

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

ITU/IEC Impulse Current

MIG0624TEL

Waveform (Range):	8/20 µs (up to 24 kA)	enlarge
Coupling:	cable 1 m with test adaptor
Standards:	ITU-T K.44, K.17, K.20, K.21
Options:	Resistor network
Required Accessory:	TC-MIG24 or CN-MIG24

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

MIG0612T-K12

Waveforms (Range):	8/20µs (up to 12kA) 10/350µs (up to 4kA) 10/1000µs (up to 200A)	enlarge
Standards:	ITU-T K12	enlarge
Required Accessories:	TC-MIG24 HL test cabinet	enlarge

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

MIG0624T-K12

Waveforms (Range):	8/20µs (up to 24kA) 10/350µs (up to 8kA) 10/1000µs (up to 400A)	enlarge
Standards:	ITU-T K12	enlarge
Required Accessories:	TC-MIG24 HL test cabinet	enlarge

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

ITU Power Induction/Contact

MIG-ITU-K44

A device for power induction testing at frequencies of 50Hz and 60Hz

Rating:	50V up to 1690V continuous power up to 3.5kVA short time power up to 7kVA timer 0.1 up to 9.9s	enlarge
Coupling:	2 x 200 Ohm 2 x 600 Ohm	enlarge

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

NW-K44PC

Accessory to the TRA2000 with DIP circuit.
NW-K44PC enables power contact testing at frequencies of 50Hz and 60Hz.

Power Contact:	Rating:	230V up to 23A	enlarge
	Coupling:	2 x 300 ohm 2 x 600 ohm 2 x 1000 ohm 2 x 1200 ohm
	Option:	TRA OPTION NW-K44PI

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

TRA OPTION NW-K44PI

Option to NW-K44PC.

Power induction network includes transformer and current limiting resistors.		enlarge
Accessories:	PCPI160E	enlarge

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

FCC part68

MIG0603FCC

Waveforms (Range):	CWG 1.2/50 µs, 8/20 µs (6 kV, 3 kA) 9/720 µs, 5/320 µs (6 kV, 150 A) 10/160 µs, 10/160 µs (1500 V, 200 A) 10/560 µs, 10/560 µs (800 V, 100 A) 2/10 µs, 2/10 µs (2500 V, 1000 A)		enlarge
Coupling:	a.c.:	CWG, 280 V/16 A 2/10 µs, 280 V/16 A
	d.c.:	CWG, 110 V/ 16 A 2/10 µs, 110 V/16 A
Standards:	IEC 61000-4-5, ITU-T K.44, FCC 68 part 68
Accessories:	see accessories for telecom coupling

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.

Telecom Coupling

CDN-UTP and CDN-UTP8

The CDN-UTP (4 lines) and the CDN-UTP8 (8 lines) are sophisticated coupling and de-coupling networks for superimposing surge impulses on balanced communication lines in accordance with IEC61000-4-5, ITU-K20, K21 and FCC part 68. The CDN-UTP and CDN-UTP8 are specially designed to fulfil the requirements of modern high speed communication systems.

Rating:	Surge 1.2/50, 8/20 µs: max. 6.6 kV Surge 10/700 µs: max. 6.0 kV	enlarge
Application:	tested and recommended: - Analogue subscriber lines (a/b-line) - ISDN - ADSL resp. xDSL - Ethernet: 10Base-T - USB - Interbus - Profibus - ASI = Actor Sensor Interface
Standards:	IEC 61000-4-5, FCC part 68, ITU-K.44, -K.20, K.21
Coupling:	- direct - via 90V gas arrestor (GTD) - via 90V gas arrestor // 100nF - via 66V clamping diode - different resistors: 25, 50, 100, 80, 100 Ohm
De-coupling:	- common mode inductance 20 mH - d.c. resistance 3.5 Ohm max. unbalanced 0.003 Ohm
Can be used with generators:	TRA2000IN4, TRA2000IN6, MIG0603IN2, MIG0603IN3, MIG0603EN, MIG0603FCC

CDN-KIT1000

The CDN-KIT1000 is a universal coupling/de-coupling kit for unbalanced telecom and communication lines.

Rating:	Surge 1.2/50, 8/20 µs: max. 6 kV Surge 10/700 µs: max. 6 kV	enlarge
Application:	unshielded and unbalanced telecom lines
Standards:	IEC 61000-4-5, FCC part 68, ITU-K.44, -K.20, K.21
Coupling:	- direct - via 0.5µF and 40 Ohm resistor
De-coupling:	- clamping diode 27 V - clamping diode 54 V - clamping diode 81 V - direct 220 V
Can be used with generators:	TRA2000IN4, TRA2000IN6, MIG0603IN2, MIG0603IN3, MIG0603EN, MIG0603FCC

CN10-700E25

The CN10-700E25 is a specialist coupling unit for telecom testing.

Rating:	Surge 1.2/50, 8/20 µs: max. 6 kV Surge 10/700 µs: max. 6 kV	enlarge
Application:	balanced and unbalanced telecom lines
Standards:	ITU-K.44, -K.20, K.21
Coupling:	2 x 25 Ohm coupling with 90 V GDT
Can be used with generators:	TRA2000IN4, TRA2000IN6, MIG0603IN2, MIG0603IN3, MIG0603EN, MIG0603FCC

For more information please have a look at

our brochures (pdf) about the telecom testers
or contact the representative in your region.