One Box EMC Test Station

Below you find short descriptions of EMC PARTNER's One Box EMC Test Stations:

• Surge 4 kV,
• Surge 4 kV and 10/700 µs 4 kV and
• Surge 6 kV and Ring 6 kV.
  
  
  

TRA2000

Waveforms (Range):	ESD (8/15 kV), EFT (4 kV), SURGE (4,1 kV), DIPS (280 V/16 A), V-VARIATION (up to 280 V/6 A)	enlarge
Coupling:	a.c.: single phase 16 A/260 V d.c.: 16 A/110 V
Standards:	IEC 61000-4-2, -4, -5, -8, -9, -11, -16, -29
Required Accessory:	ESD Mouse CNEFT1000 coupling clamp

 

For more information please have a look at

• our One Box EMC Test Stations brochure (pdf),
• the application notes (incl. test guides),
• or contact the representative in your region.

TRA2000IN4

Waveforms (Range):	ESD (8/15 kV), EFT (4 kV), Surge (4 kV), DIPS (280/16 A), V-Variation (up to 280 V/6 A) 10/700 µs (4 kV), Ring 100 kHz (6 kV)	enlarge
Coupling:	a.c.: for single phase 16 A/260 V d.c.: 16 A/110 V
Standards:	IEC 61000-4-2, -4, -5, -8, -9, -11, -12, -16, -29, ITU K.17
Required Accessory:	ESD-Mouse CNEFT1000

 

For more information please

• our One Box EMC Test Stations brochure (pdf),
• have a look at the application notes (incl. test guides)
• and contact us or one of our representatives.

TRA2000IN6

Waveform (Range):	ESD (8/15 kV), EFT (4 kV), Surge (6 kV), DIPS (280 V/16 A), V-Variation (up to 280 V/6 A), Ring (6 kV)	enlarge
Coupling:	a.c.: single phase 16 A/260 V d.c.: 16 A/110 V
Standards:	IEC/EN 61000-4-2, -4, -5, -8, -9, -11, -12, -16, -29, ANSI/IEEE C62.41, ANSI/IEEE C62.45
Options:	Option 10/100 Option External CDN coupling Option Diagnostic 1P
Required Accessory:	ESD Mouse CNEFT1000

 

For more information please have a look at

• our One Box EMC Test Stations brochure (pdf),
• the application notes (incl. test guides),
• the calibration protocol
• or contact the representative in your region.

CDN2000A-06-32

Rating:	Supply Voltage (a.c. or d.c.): L to N/PE 240 V, L to L 480 V Supply Current: Continuous operation (a.c. or d.c.): 3 x 32 A Continuous operation (d.c.): 1 x 64 A Test Voltages: Surge voltage: maximum 6.6 kV Ring voltage: maximum 6.6 kV EFT voltage: maximum 6.3 kV	enlarge enlarge enlarge
Control:	RS232 connection from the rear side of the TRA2000 or MIG0603INx to the CDN2000A-06-32 For the selection of the coupling paths see the displays on the right. Power supply: 90 to 240 V and 50/60Hz
Standards:	IEC 61000-4-5, ANSI/IEEE C62.41 and C62.45, IEC 61000-4-4
Option:	480V: for power supply L to N/PE 280 V and L to L 480 V
For use with these generators:	TRA2000, TRA2000IN4, TRA2000IN6, MIG0603IN, MIG0603IN1, MIG0603IN3, MIG0603IN4

For more information please have a look at

• our brochures (pdf) about our One Box EMC Test Stations and the surge testers,
• the calibration protocol,
• or contact the representative in your region.