customer services

Service is more than just a word to us! It is a promise for the future. As experts in high voltage impulse technology, EMC PARTNER AG has built a reputation offering innovative solutions for diverse EMC requirements. Delivering high quality test equipment is only the start of your journey with us. Support for our customers throughout an equipment’s lifetime is something that sets EMC PARTNER AG in a class of its own. Either directly from our facility in Switzerland or through our network of services centres, we provide support wherever you are.

Instrument Care

Repairs can be made in Switzerland or locally by one of our trained and certified representatives.

Calibration

EMC PARTNER instruments have a reputation for delivering accurate and repeatable impulses. A precise calibration, following an accredited scheme to ISO/IEC 17025 maintains confidence in the equipment over long periods of time.

Upgrades & Updates

Upgrades offer our customers fast and low cost access to increased test capability with local support.  Updates offered as part of a repair or calibration, further extend instrument life.

Training

Optimise use of EMC PARTNER generators or learn about EMC standards. Training is always a valuable asset.

Web-based services

Explore the wealth of information available to assist with getting the most from our instruments.

Service & Repair

Using latest technology to reach our customers from Switzerland or one of our certified service centres.

Instrument Care

Instrument Care

EMC PARTNER generators are built to a high quality standard. After many years in service, instruments returned for repair are treated with the same care as a newly produced item. Should a repair be necessary, EMC PARTNER or one of our trained and certified representatives are the first point of contact for our customers. Through a worldwide network of approved service centres, we are able to offer a fast and efficient turn-around.

Before proceeding with a repair, our team of experienced engineers carry out an assessment of the required work informing the customer and also making them aware of upgrades that would enhance their instruments performance. Only the original equipment manufacturer can
offer such a service.

Repairs carried out by approved service centres

  • Are made fast and efficiently
  • Use only original replacement parts
  • Include an instrument health check
  • Are guaranteed

Accredited Calibrations

Accredited Calibrations

EMC PARTNER instruments have a reputation for delivering accurate and repeatable impulses. A precise calibration, following an accredited scheme to ISO/IEC 17025 maintains confidence in the equipment over long periods of time. This improves your product quality and reduces time to market. ISO / IEC 17025 accredited calibrations are a guarantee of quality accepted worldwide through the ILAC MRA scheme.

An accredited calibration at EMC PARTNER delivers

  • Certificate including all measurement data points
  • Measurement uncertainty for every parameter
  • Test equipment traceable to national standard
  • Quality assurance system defining all processes

To ensure the highest quality, EMC PARTNER AG has invested in acquiring and maintaining an ISO / IEC 17025 accredited certification at our production facility in Switzerland. The EMC PARTNER accreditation (SCS 146) covers all our EMC instrumentation and extends beyond the scope of most EMC generators.

IEC 61000-4-2 ESD Up to 30kV
IEC 61000-4-4 EFT Up to 8kV
IEC 61000-4-5 Voltage Surge Up to 25kV
IEC 61000-4-5 Current Surge Up to 100kA
IEC 61000-4-8 AC MAG Field Up to 1000A / m
IEC 61000-4-9 IMP MAG Field Up to 1600A / m
IEC 61000-4-10 DOW MAG Field Up to 300A / m
IEC 61000-4-11 AC DIPS Up to 75A
IEC 61000-4-12 RINGWAVE Up to 12kV
IEC 61000-4-18 DOW Up to 5kV
IEC 60060 VOLTAGE IMPULSE Up to 25kV
ITU-T K44 10/700us Up to 12kV

Service & Repair

HEADQUARTER SERVICES

As a manufacturer, our aim is always to deliver new equipment to the highest standard. This means equipment can be in service for a very long time. Wherever possible, our aim is to support customers even after a product is finished in production and been replaced by a newer model.

Provided that parts are available, we do our best to support your investment. Our fully equipped service team is ready to help you with technical issues or general service related enquiries. As the manufacturer, EMC PARTNER, have the expertise to offer an efficient and cost effective repair service from our factory.

We are at your service in Switzerland for

CUSTOMER SITE SERVICES

We understand that time is valuable. To help optimize our customers use of EMC PARTNER equipment and in certain circumstances, it may be more efficient for our engineers to travel to the customer site.

This could be for example to perform:

  • Product installation
  • Product commissioning
  • EMC training
  • Accredited calibration
Certified Service Centers

Service Partner Logo v.2_Zeichenfläche 1.pngEMC PARTNER products are supported by a worldwide network of representatives. All representatives receive specialist training at EMC PARTNER AG and are able to support customers with initial enquiries. In depth servicing is provided from specialist centres in the USA, Germany, SwitzerlandChina, Taiwan, Singapore, India and Korea.

worldwide_centers.png

Training

Training

We offer specific trainings for EMC Partner products and test applications. Trainings can take place in groups/teams or individually. Learn how to set up a test, understand test routines better and create tailored, company-related test reports. Get in touch with us for a customised offer.

Web-Based Services

Service Ticket

 We are at your service! For any technical or applications questions please complete a service ticket. One of our customer service engineers will provide a response.

Ticketing

Software Updates

All of our software will be updated regulary. You can download the latest version of your EMC PARTNER AG software via our download section. 

Updates & Upgrades

Updates

EMC PARTNER generators are built to a high quality standard. After many years in service, instruments returned for repair are treated with the same care as a newly produced item.

Should a repair be necessary, EMC PARTNER or one of our trained and certified representatives are the first point of contact for our customers. Through a worldwide network of approved service centres, we are able to offer a fast and efficient turn-around. Before proceeding with a repair, our team of experienced engineers carry out an assessment of the required work informing the customer and also making them aware of upgrades that
would enhance their instruments performance. Only the original equipment manufacturer can offer such a service.

Repairs carried out by approved service centres

  • Are made fast and efficiently
  • Use only original replacement parts
  • Include an instrument health check
  • Are guaranteed

 

Upgrades

Upgrades are a method to enhance generator application by adding new functions. In most cases, upgrades can be made locally either at the customer site or the EMC PARTNER representative office.

Customer upgrades are made using easy to follow video instructions provided by EMC PARTNER. In most cases, the only tools required are screwdrivers and a little patience.

Upgrades of EMC PARTNER instruments offer our customers

  • Fast access to increased test capability
  • Lower cost than buying additional instruments
  • Protection for future applications
  • Familiarity with operating system
  • Rapid integration into EMC PARTNER software packages

 

Contact

EMC PARTNER AG Service Headquarter

 

 

Address

EMC PARTNER AG
Baselstrasse 160
CH - 4242 Laufen
Switzerland

Follow us