IMU-MGS
Modular conducted immunity generator up to 5KV EFT/Burst, 5.1KV SURGE
Modular test system with colour touch screen and intuitive software. An integrated help with graphics guide the user through fast and efficient setup and operation. The system is used for CE mark testing in the European Union. Each system can be individually configured and easily extended. 10 modules are available for the IMU-MGS. All modules are easily added or removed by the user on-site. The generator can be configured for IEC / EN and also ANSI test requirements. ElectroMagnetic Compatibility (EMC) tests for Surge up to 5kV and EFT up to 5kV are freely configurable by the user. IMU-MGS is programmed with default parameters from the IEC basic standards. A test library including basic and generic requirements is also included in the IMU-MGS.
Pulses
- Surge / CWG up to 5kV
- EFT / Burst up to 5kV
- Common Mode 35V/330V
- AC & DC Interrupts up to 16A
- AC DIPS & Variation up to 16A
- Differential Mode voltage / current
- ESD up to 16kV
Documents
Conducted ImmunityYour Benefits
- One touch parameter editing in run state
- Impulse stability over long periods
- Intuitive multi touch graphical interface
- Upgradeable hardware to increase test capability
- Test report in three user selectable formats
IEC 61000-6-1 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments |
IEC 61000-6-2 | Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments |
IEC 60255-26 | Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements |
IEC 60571 | Railway applications - Electronic equipment used on rolling stock |
EN 50121-3-2 | Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus |
EN 50121-4 | Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus |
EN 50155 | Railway applications. Rolling stock. Electronic equipment |
IEC 61851-22 | Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply |
IEC 61851-21-2 | Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems |
IEC 60601-1-2 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
IEC 61000-4-2 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
IEC 61000-4-4 | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques |
IEC 61000-4-5 | Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test |
IEC 61000-4-8 | Electromagnetic compatibility (EMC) |
IEC 61000-4-9 | Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test |
IEC 61000-4-11 | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
IEC 61000-4-16 | Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz |
IEC 61000-4-19 | Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports |
IEC 61000-4-29 | Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests |
 | Basic- and Product standard requirements & Solutions |
 | Electrostatic discharge testing |