Calibration load 0.1 Ohm for WF2 and WF3, short circuit currentCurrent shunt for waveform 2 and 3 calibration;

SHUNT0E1

Current shunt for waveform 2 and 3 calibration

Calibration load 0.1 Ohm for WF2 and WF3, short circuit current     

Connection cable 2m with 2x 470kOhm resistors and banana plugs. For use with ESD-VCP50 and Horizontal Coupling Plane, also for deionization of products.

Inquiry SHUNT0E1

Features & Benefits

Features

High voltage connections

Application for PIN injection

Accurate impulse current measurement

Benefits

Impulses / Circuits

Impulses / Circuits

WF2 (0.3/6.4)

WF3 (1MHz/10MHz)

Standards

Standards

RTCA DO-160 - Section 22

Product Number: 103575
Features

-  High voltage connections

Connection cable 2m with 2x 470kOhm resistors and banana plugs. For use with ESD-VCP50 and Horizontal Coupling Plane, also for deionization of products.

NW Accessories for Avionic Test Systems

extends MIG-OS-MB to L5+ test levels
plug in to the MIG-OS-MB-EXT. Double exponential wave 0.1/6.4 for single pulse generation or first stroke of a multiple stroke sequence
DO-160 / ED-14 WF2: 0.1/6.4
Extends the MIG-OS-MB for single stroke and first stroke testing according DO-160 / ED-14 WF3: 10MHz.
Extends the MIG-OS-MB for subsequent stroke testing according DO-160 / ED-14 WF3: 10MHz
Extension for MIG-OS-MB to enable DO-160 / ED-14 WF3: 1MHz, Level 5 single stroke and first stroke testing
Extension to the MIG-OS-MB-EXT to ABD0100.1.2_G lightning test requirement.
Extension for MIG-OS-MB to enable DO-160 / ED-14 WF3: 1MHz, Level 5 subsequent stroke testing
Extension to MIG-OS-MB(or -EXT) for ABD0100.1.2_G requirements for MS subsequent and MB testing
Extension for MIG-OS-MB to enable DO-160 / ED-14 WF3: 1.5MHz, Level 5 single stroke and first stroke testing
Extension for MIG-OS-MB to enable DO-160 / ED-14 WF3: 3MHz, Level 5 single stroke and first stroke testing
Waveform 3 module frequency 4.3MHz single stroke.
Waveform 3 module frequency 5MHz single stroke.
Waveform 3 module frequency 5MHz multiple burst.
Waveform 3 module frequency 5MHz subsequent stroke.
Extensions for DO-160 / ED-14 WF6H, 0.224/4
Extension to MIG-OS-MB(or -EXT) for ABD0100.1.2_G lightning test requirements for single stroke testing
Current shunt for waveform 2 and 3 calibration
WF2 (0.3/6.4)
WF3 (1MHz/10MHz)








-  Accurate impulse current measurement


Calibration load 0.1 Ohm for WF2 and WF3, short circuit current

Current shunt for waveform 2 and 3 calibration

WF3 (1MHz/10MHz)
Avionic Test Accessories
Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok Decline