IEC 61643-1
 | Single Stroke Generator according to DO-160 section 22 | |
 | Surge Generator CWG 12kV / 6kA, 2 Ohm with automatic 1-Phase CDN | |
 | Modular impulse test system | |
 | 500V - 30 kV impulse voltage generator | |
 | 24 kV Lightning voltage impulse generator | |
 | CURRENT TESTER 8/20, 4X 12KA, ZSOURCE PER CIRCUIT 1 OHM. | |
 | Multi function Damped Oscillatory Wave (DOW) generator | |
 | MIG1203 STEP MIG1203 with STEP function | |
 | GENERATOR FOR DO-160 / ED-14 SECTOIN 22 INDIRECT LIGHTNING TESTS ON AIRCRAFT | |
 | Dual surge current generator according ITU K.12: 10/1000µs 8/20µs 40/350µs 10/350µs | |
 | Handheld ESD Simulator with modular discharge networks | |
 | Combination Wave Generator according to IEC 61000-4-5 12kV/6kA 2 Ohm with automatic three phase coupling network 480V and 32A. | |
 | Single stroke indirect lightning generator | |
 | Active flammability test on X and Y capacitors | |
 | PS3 - Power Source 3000W Single phase Power Source with pre-programmed voltage & frequency combinations | |
 | Combination wave generator 12kV, 6kA. | |
 | Current generator with a current wave shape 8/20us up to 12kA | |
 | 24 kA impulse current generator for GDTs | |
 | IN PERFECT HARMONY - Signalling INTEREFERENCE in VOLTAGE & CURRENT Circuits | |
 | Surge Generator according to IEC 61180-2. CWG 18kV, 9kA | |
| Insulation test system 1.2/50 up to 12kV | |
 | extends MIG-OS-MB to L5+ test levels | |
 | Multiple Stroke Indirect lightning impulse generator | |
 | 12 kV impulse generator with CWG, 1-Phase CDN and 10/700 | |
 | Compact indirect lightning impulse generator | |
 | Current impulse generator 60kA | |
| 1.2/50 lightning impulse generator up to 18 kV with 40 Ohm impedance | |
 | Compact impulse generator for SPD testing | |
 | 144 kV Lightning voltage impulse generator | |
 | 8KV EFT/Burst, SURGE, Ringwave and 10/700us impulse generator | |
 | Impulse current generator 10/350 | |
 | Current tester 8/20, 4x 6kA , Zsource per circuit 1 Ohm. | |
 | 12 kV insulation tester for X & Y capacitors | |
 | 24 kA impulse current generator with 4 outputs | |
 | Indirect lightning effects test system | |
 | Full vehicle impulse current generator | |
 | Clamping voltage tester 8/20 current range 0.5A up to 500A | |
 | Varistor clamping voltage tester | |
 | Current Generator up to 100 kA, 8/20us short circuit current | |
 | Insulation Tester 1.2/50 up to 48 kV and 8/20 up to 3kA | |
 | Impulse Insulation Tester 10/700, and 1.2/50 up to 6kV | |
 | Dual surge current generator according ITU K.12: 10/1000µs 8/20µs 40/350µs 10/350µs | |
 | Surge Test Generator CWG 12kV / 6kA, 2 Ohm with automatic 3-Phase CDN | |
 | 5KV EFT/Burst and SURGE compact generator | |
 | Power induction tester | |
 | 6 kV insulation tester for X capacitors | |
 | 1 kA impulse current generator 10/1000us | |
 | 12 kA impulse current generator | |
 | 8 kV impulse voltage tester with fixed energy and impedance. |
 | Protection relay 0.5J/500 Ohm impulse network | |
 | Extension to MIG-OS-MB(or -EXT) for ABD0100.1.2_G lightning test requirements for single stroke testing | |
 | plug in to the MIG-OS-MB-EXT. Double exponential wave 0.1/6.4 for single pulse generation or first stroke of a multiple stroke sequence | |
 | Plugin to MIL3 for CS116 Testing 30 and 100MHz | |
 | MIL3-1275B Plug-in module for MIL-STD-1275B | |
 | ESD3000RM32 Relay module with high voltage and polarity switch | |
 | Extensions for DO-160 / ED-14 WF6H, 0.224/4µs Impulse. 14 pulses Multiple Burst only. | |
 | ESD Extension for IMU up to 16kV AD, 10kV CD | |
 | Extends the MIG-OS-MB for single stroke and first stroke testing according DO-160 / ED-14 WF3: 10MHz. | |
 | Plugin to MIL3 for CS116 Testing 10, 100kHz, 1 and 10MHz | |
 | Extension for common mode short duration tests according IEC 61000-4-16 | |
 | Discharge Network up to 30kV according ISO TR 10605. 150pF, 330 Ohm | |
 | Plug-in according to DO-160 section 19 "Induced Signals" | |
 | Plug-in in accordance with MIL-STD-461 CS06 Spike testing | |
 | Plug-in according to DO-160 section 17 "Voltage Spikes" | |
 | EXT-COMP0804CAP Extends the COMP0804CAP load range 1µF up to 50µF for X capacitor Vpeak up to 4kV | |
 | Electrostatic Discharge Module 150pF, 330 Ohm for AD up to 16kV, CD up to 10kV | |
| Plug-in in accordance with MIL-STD-461 CS06 "Spike testing | |
 | Plug-in in accordance with MIL-STD-461 CS106 "Spike testing" | |
 | Impulse forming network for cable bundle testing with waveform 3 1MHz from DO-160 | |
 | Plug-in for MIL3 Generator for testing MIL-STD-461 CS115 rectangular |
 | Coaxial test tip for pin injection designed for use with MIG-OS-MB and MIG-OS-MB-EXT. | |
 | Test cabinet to test explosive devices. With interlock safety switch. | |
 | Differential voltage probe for impulses up to 7kV | |
 | External Red and Green warning lamps | |
| 3000W Single phase Power Source with pre-programmed voltage & frequency combinations | |
 | Damping circuit to CDN for DC-DC converter testing | |
 | Audio/Video and ITE network | |
 | 1kOhm EFT termination with HV BNC and | |
 | Coupling network for common mode coupling dc, 50/60Hz and sinusoidal up to 150kHz | |
| Discharge Network up to 30kV according ISO TR 10605. 150pF, 330 Ohm | |
 | SRC32-18UH Testing according to IEC 61000-4-11 and IEC 61000-4-34 with maximum EUT current 32A. Used together with the PFS32 to perform dips testing. | |
 | Coupling-Decoupling Filter up to 50kA with Power Source | |
 | MIG-EUT-SET EUT Adapter with 8 outputs to COMP0804CAP stand alone or with EXT-COMP0804CAP | |
 | Damping circuit to CDN for DC-DC converter testing | |
 | Voltage probe for impulses up to 4kV | |
 | External emergency stop switch | |
 | Test coil 1m x 1m for magnetic field test according to IEC 61000-4-8 only for short duration 3s 1000A/m. | |
 | Indirect ESD Field-Coupling-Plane in accordance with ISO 10605 | |
 | 50 Ohm EFT termination with HV BNC connectors | |
 | Resistor set for the power contact testing in accordance with ITU-T K44 | |
 | 3-Phase Interrupt Tester Type up to 32A/480V AC/DC | |
 | Coupling Network for power induction tests according to ITU-T K44 | |
 | External 16A Variac for Dips and Variations | |
| Test cabinet made of acrylic glass, With interlock safety switch. | |
 | Single phase DIP transformer 230V/16A 50/60Hz. According to IEC 61000-4-11 | |
 | CN-BALUN-AC Balanced / unbalanced transmission line transformer for EFT and 1MHz Damped Sine | |
 | Test coil 1m x 2.6m for magnetic field test according -8 / -9 / -10 | |
 | Extension Network to perform Power Contact (PC) tests according to ITU-T K.44 | |
 | Network for MIG1203 STEP. Voltage range up to 10kV in accordance with IEC / EN 60065 | |
 | VERI-MIL3 Calibration fixture for MIL-STD-461 | |
 | Test Cabinet for flammability cap. testers with safety switch. Glass protection against fire. | |
 | Damping circuit to CDN for DC-DC converter testing | |
 | 50 Ohm EFT termination with HV BNC connectors | |
 | MIG-CAP DUT-MUX auto coupling switch matrix 8 outputs | |
 | Line impedance stabilisation network for the high voltage and high current application in accordance with DO160 Section 22 | |
 | Capacitive EFT/Burst Coupling Clamp 100pF | |
 | MF1000-1 Inductive coil 1 x 1 m | |
 | Coupling and Decoupling Network (CDN) for injecting disturbance signals | |
 | 0.1 ohm current shunt | |
 | Extends IMU for dc interrupt testing. DC power fail simulator for Imax 125Adc. Vmax 600Vdc. Output floating DC+, DC- and ground | |
 | Damping circuit to CDN for DC-DC converter testing | |
 | Matching network to INS-1250 | |
 | 2 Ohm ESD Target with SMA connector & target attenuator cable chain for up to 30kV | |
 | CN-MIG-SMD CAP Adapter set for SMD capacitors | |
 | 10/50 Ohm CDN calibration balun | |
 | Direct Coupling Network for Railway Applications | |
 | Charging voltage measurement divider 20GOhm | |
 | VERI-CP-EFT is a transducer plate to calibrate the coupling clamp |
 | EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 125A per phase | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 125A per phase | |
 | Surge & Ringwave testing on up to 4 asymmetrical data lines | |
 | 6 kV Impulse testing of up to 4 Unbalanced Twisted Pairs (UTP) | |
 | Coupling network for common mode coupling dc, 50/60Hz and sinusoidal up to 150kHz 8 lines | |
 | EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 200A per phase | |
 | Automatic 3-Phase CDN up to 32A / 8kV for EFT, Surge and Ringwave (690V) | |
 | EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 63A per phase | |
 | Mains de-coupling transformer single phase up to 16A for IEC 61000-4-16 common mode testing. | |
 | CDN for oscillatory wave testing of data lines | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 200A per phase | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 63A per phase | |
 | Coupling network for differential mode coupling up to 250V 50/60Hz | |
 | Three phase CDN for MIG1206 | |
 | Single phase ANSI coupling network | |
 | Coupling network for common mode coupling dc up to 300V | |
 | High speed common mode coupler | |
 | CDN for 1.2/50, Ringwave and 10/700 surge coupling 6kV to 2 pair (4 wires) balanced communication lines | |
 | EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 32A per phase | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 32A per phase | |
 | Surge & Ringwave testing on up to 8 asymmetrical data lines | |
 | Three Phase CDN up to 8kV - Manually Operated for EFT | |
 | SURGE coupling-decoupling network for data lines IEC 61000-4-5 ED3 | |
 | Coupling network for common mode coupling up to 300V 50/60Hz | |
 | CDN for oscillatory wave testing of high speed data lines | |
| EFT, Surge & Ring wave manual 3-phase CDN for power supply lines. EUT max 690Vac / 1000Vdc / 32A per phase |
| Surge & Ringwave testing on up to 8 asymmetrical data lines | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 125A per phase | |
| CDN-A-8-125 EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 125A per phase | |
 | CN-MIG-BT5 Injection probe for frequency range 10kHz up to 10MHz, (MIL-STD-461 / DO-160) | |
| Automatic 3-Phase CDN up to 32A / 8kV for EFT, Surge and Ringwave (690V) | |
 | CN-MIG-BT3 Coupling transformer for cable bundle test up to max. level 3200V. | |
| SURGE coupling-decoupling network for data lines IEC 61000-4-5 ED3 | |
| Coupling network for common mode coupling dc, 50/60Hz and sinusoidal up to 150kHz 8 lines | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 32A per phase | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 63A per phase | |
 | Voltage coupling trafo for voltage waveform WF4 and WF5A coupling | |
| 6 kV Impulse testing of up to 4 Unbalanced Twisted Pairs (UTP) | |
| CDN for oscillatory wave testing of data lines | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 200A per phase | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 63A per phase | |
| Coupling network for differential mode coupling up to 250V 50/60Hz | |
| Surge & Ringwave testing on up to 4 asymmetrical data lines | |
| Three phase CDN for MIG1206 | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 200A per phase | |
 | Injection probe for f-range 10kHz up to 100MHz, application for MIL-STD-461 CS116, CS115 | |
| Single phase ANSI coupling network | |
| High speed common mode coupler | |
 | Coupling trafo for cable induced and ground injection | |
 | Coupler for WF5A V/I max 2000V/2000A to MIG0600MS | |
| EFT, Surge & Ring wave automatic 3-phase CDN for power supply lines. EUT max 690Vac / 1500Vdc / 32A per phase | |
 | Large diameter injection probe for DO-160 section 22 and MIL-STD-461G CS117 cable bundle tests with AVI3000 | |
| Direct Coupling Network for Railway Applications | |
| CDN for 1.2/50, Ringwave and 10/700 surge coupling 6kV to 2 pair (4 wires) balanced communication lines | |
| Three Phase CDN up to 8kV - Manually Operated for EFT | |
| Coupling network for common mode coupling up to 300V 50/60Hz | |
| CDN for oscillatory wave testing of high speed data lines | |
| EFT, Surge & Ring wave manual 3-phase CDN for power supply lines. EUT max 690Vac / 1000Vdc / 32A per phase |
