1.2/50µs lightning impulse generator up to 12 kV with 40 Ohm impedance. High voltage outputs on top plate protected by TC-ST test cabinet.
The MIG1203 is an insulation tester with a voltage wave shape 1,2/50. The specified voltage waveform is generated across an open circuit (oc), or within the load range specified under technical data. The exact waveform delivered is a function of the surge generator and the impedance to which the surge is applied. For failure detection (breakdown, flashover) the peak output voltage and current of the MIG are indicated on the front display and the two BNC monitor outputs (v,i) allow monitoring the voltage and current wave shapes on an oscilloscope.
✓ Impulse repeatability pulse to pulse
✓ Reproducible test results between locations
✓ Save operator time with the automated test routines and test report facility
✓ Voltage impulse 1.2/50 us
✓ Convenient BNC monitor outputs
✓ Electronic polarity change
✓ High degree of automation without software
✓ Reliable solid state impulse switch
✓ Extend application range with external networks
✓ Long duration test impulse repeatability
- IEC 60664-1
- IEC 61180
- IEC 60060-1
- IEC 61010-1
No further media / documents available