The 1,500 V output meets all basic and enhanced test levels required by ITU- T K.20 and ITU-T K.21. Test duration is set manually on the generator front panel.
MIG-ITU-K44 is designed for power induction testing at line frequencies of 50 and 60Hz. Basic and enhanced level tests up to 1,500 V can be performed according to ITU-T K44. Test duration is set directly on the MIG-ITU-K44 front panel.
Internal coupling resistors 200 Ohm and 600 Ohm can be complimented by PCPI160E external reistor network for testing on up to 8 lines.
- Designed for ITU Basic & Enhanced Levels
- Supports Power Induction Tests
- Integrated AC source up to 1500 V
- Use with PCPI160E resistor banks
- Integrated measurement circuits
- Stand alone system for power induction
- Meets all ITU requirements
- Easy monitoring of test current on a DSO
✓ Fully reproducible test results between locations
✓ Save operator time with the automated test routines and test report facility
✓ Designed for ITU Basic & Enhanced Levels
✓ Supports Power Induction Tests
✓ Internal programm Memory
✓ Application based solutions & Intuitive user interface
- IEC 61000-4-5
- ITU-T K.20
- ITU-T K.21
- ITU-T K.44
No further media / documents available