Standard Library

RTCA DO-160 - Section 25

Environmental Conditions and Test Procedures for Airborne Equipment

RTCA DO-160 - Section 19

Environmental Conditions and Test Procedures for Airborne Equipment

Boeing D6-16050

Different manufacturer standards related to indirect lightning test

EUROCAE/ED-14

Environmental Conditions and Test Procedures for Airborne Equipment

IEC62368-1

Audio/video, information and communication technology equipment - Part 1: Safety requirements

RTCA DO-160 - Section 22

Environmental Conditions and Test Procedures for Airborne Equipment

RTCA DO-160 - Section 17

Environmental Conditions and Test Procedures for Airborne Equipment

Airbus ABD0100-1-2

Different manufacturer standards related to indirect lightning test

ANSI/IEEE C37.90

Relays and Relay Systems Associated with Electric Power Apparatus

UL 1414

Capacitors and Suppressors for Radio- and Television-Type Appliances

ANSI/IEEE C62.45

Recommended Practice on Surge Testing for Equipment Connected to Low-Voltage (1000 V and Less) AC Power Circuits

Airbus ABD0100-1-8

IEC 62052-11

Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 11: Metering equipment

IEC 60060-1

High-voltage test techniques - Part 1: General definitions and test requirements

IEC 62771-1

High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear

IEC 61851-21-2

Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems

IEC 60384-14

Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains

IEC 61051-1

Varistors for use in electronic equipment - Part 1: Generic specification

IEC 61643-1

IEC 61730-2

Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing

IEC 61643-11

Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods

IEC 60255-26

Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements

IEC 61643-11

Low-voltage surge protective devices - Part 11: Surge protective devices connected to low-voltage power systems - Requirements and test methods

EN 50470-1

Electricity metering equipment (a.c.) Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)

IEC 61000-6-1

Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity standard for residential, commercial and light-industrial environments

IEC 61340-3-1

Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms

IEC 60065

Audio, video and similar electronic apparatus - Safety requirements

EN 50155

Railway applications. Rolling stock. Electronic equipment

EN 61543

Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility

EN 50121-3-2

Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus

IEC 60747-5

Semiconductor devices - Discrete devices - Part 5-5: Optoelectronic devices - Photocouplers

IEC 61010-1

Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements

IEC 60335

IEC 61008-1

Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) - Part1: General rules

IEC 61980-1

Electric vehicle wireless power transfer (WPT) systems - Part 1: General requirements

IEC 60571

Railway applications - Electronic equipment used on rolling stock

IEC 60947-1

Low-voltage switchgear and controlgear - Part 1: General rules

IEC 61851-22

Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply

IEC 61643-21

Low voltage surge protective devices - Part 21: Surge protective devices connected to telecommunications and signalling networks - Performance requirements and testing methods

IEC 60255-27

Measuring relays and protection equipment - Part 27: Product safety requirements

IEC 61730-1

Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction

IEC 62305-4

Protection against lightning - Part 4: Electrical and electronic systems within structures

IEC 61000-6-2

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments

IEC 61439-1

Low-voltage switchgear and controlgear assemblies - Part 1: General rules

IEC 61180

High-voltage test techniques for low-voltage equipment - Definitions, test and procedure requirements, test equipment

IEC 61051-1

Varistors for use in electronic equipment - Part 1: Generic specification

IEC 60950-1

Information technology equipment - Safety - Part 1: General requirements

EN 50121-4

Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus

IEC 60945

Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results

IEC 60664-1

Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests

IEC 60601-1-2

Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests

IEC 61009-1

Residual current operated circuit-breakers with integral overcurrentprotection for household and similar uses (RCBOs) - Part 1: General rules

IEC 61000-4-9

Electromagnetic compatibility (EMC) - Part 4-9: Testing and measurement techniques - Impulse magnetic field immunity test

IEC 61000-4-5

Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

IEC 61000-4-2

Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test

IEC 61000-4-29

Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests

IEC 61000-4-18

Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test

IEC 61000-4-12

Electromagnetic Compatibility (EMC) - Part 4-12: Testing and measurement techniques - Ring wave immunity test

IEC 61000-4-10

Electromagnetic compatibility (EMC) - Part 4-10: Testing and measurement techniques - Damped oscillatory magnetic field immunity test

IEC 61000-4-8

Electromagnetic compatibility (EMC)

IEC 61000-4-4

Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques

IEC 61000-4-34

Electromagnetic compatibility (EMC) - Part 4-34: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase

IEC 61000-4-19

Electromagnetic compatibility (EMC) - Part 4-19: Testing and measurement techniques - Test for immunity to conducted, differential mode disturbances and signalling in the frequency range 2 kHz to 150 kHz at a.c. power ports

IEC 61000-4-16

Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz

IEC 61000-4-11

Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests

UN ECE R10

Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility

JASO D001-94

General Rules of Environmental Testing Methods for Automotive Electronic Equipment

ISO 10605

Road vehicles

JASO D902-95

 Durability testing methods for automotive electronic equipment

SAE J551-15

Vehicle Electromagnetic Immunity

ITU-T K.45

Resistibility of telecommunication equipment installed in the access and trunk networks to overvoltages and overcurrents

ITU-T K.21

Resistibility of telecommunication equipment installed in customer premises to overvoltages and overcurrents  

ITU-T K.44

Resistibility tests for telecommunication equipment exposed to overvoltages and overcurrents - Basic Recommendation  

ITU-T K.20

Resistibility of telecommunication equipment installed in a telecommunication centre to overvoltages and overcurrents  

STANAG 4239

Electrostatic Discharge Test procedures

MIL-STD-461 / CS115

MIL-STD-461 / CS117

Requirements for the Control of Electromagnetic Interference Characteristics of Subsystems and Equipment

MIL-STD-461 / CS06

MIL-STD-461 / CS118

MIL-1275B

Characteristics of 28 V DC Electrical Systems in Military Vehicles

MIL-STD-461 / CS106

CS106, conducted susceptibility, transients, power leads

MIL-STD-461 / CS116

MIL-STD-331

Fuse and fuse components

DC 10614

Automotive Electrostatic Discharge (ESD)

CISPR 35

Electromagnetic compatibility of multimedia equipment - Immunity requirements

VW TL 824-66

Automotive Electrostatic Discharge (ESD)
Address

EMC PARTNER AG
Baselstrasse 160
CH - 4242 Laufen
Switzerland